Menu
EUR

Heat pump sound insulation

A heat pump is a smart choice for anyone who wants sustainable heating, but the accompanying noise from the outdoor unit can cause nuisance. Especially in densely built residential areas, gardens and against façades, the noise is quickly experienced as disturbing. Fortunately, it is possible to damp the noise of a heat pump effectively, without compromising performance. In this article, Geluidsisolatie Deal explains everything about sound insulation for the heat pump, which materials are suitable and how you can build an enclosure yourself.

Why sound insulation is necessary for heat pumps

Most of the noise comes from the outdoor unit. Think of the fan that runs continuously, or the compressor that causes a humming tone. Vibrations can also travel through the floor or mounting structure, which amplifies the noise. Without measures, this can lead to nuisance, especially with night-time operation or when installed close to the property boundary. By investing in good sound insulation for the heat pump's outdoor unit, you not only improve your own living comfort, but also prevent complaints from neighbours. Do you suffer from noise nuisance from your neighboursyourself? There is something you can do about that too!

How do you damp the noise of a heat pump?

A quiet heat pump starts with good placement. Preferably position the outdoor unit at a sufficient distance from façades or bedrooms, and make sure the air can circulate freely. The surface also plays a role: with rubber vibration dampers, you can reduce the transmission of noise through the floor. But the biggest gain often comes from a smart acoustic enclosure.

A sound-damping enclosure around the heat pump works like a shield: it damps the direct noise and prevents reflection off walls or fences. These enclosures are designed so that the airflow is maintained and the performance of the heat pump stays intact. The difference in noise level can be as much as 10 to 15 decibels, which in practice means a considerable reduction in disturbing noise.

Recommended products for heat pump sound damping

There are various high-quality solutions on the market that drastically reduce the noise of your heat pump. Below you will find three recommended products you can use:

wall sound insulation

Self-adhesive polyether foam with PU top layer

This durable polyether foam is an effective choice for anyone looking for versatile sound insulation in and around heat pumps. Thanks to the special PU top layer, it is resistant to heat, moisture and oil, which considerably extends its service life. The material is designed to absorb sound across a wide frequency range, making it suitable for both high and low tones.

Why choose this foam?

It offers a reliable combination of noise reduction and weather resistance, ideal for applications in technical installations where noise is produced continuously. This foam performs especially well in enclosures or indoor units.

wall sound insulation

Bitumen vibration damping sheet

When structural vibration and low-frequency noise are a problem, a bitumen damping sheet is an effective solution. This sheet is placed directly on metal parts of the heat pump and adds extra mass. As a result, vibrations are strongly reduced before they can spread via the sheet metal or the structure.

What makes this material so effective?

Bitumen is ideally suited to damping humming tones and vibration, resulting in quieter operation of the heat pump. Especially with indoor units or thin sheet metal where vibration noise is quickly amplified, this material offers a lot of benefit.

sticking on wall sound insulation

Glass fibre mat with aluminium top layer (self-adhesive)

This multifunctional glass fibre mat combines thermal and acoustic insulation in one product. The aluminium top layer reflects heat back to the installation, which contributes to more efficient operation. At the same time, the glass fibre material absorbs mid- to high-frequency noise, such as airflow or mechanical side noises that occur while running.

The dual action of this product:

You not only damp annoying noise, but also improve the thermal efficiency of your heat pump installation. That makes this material ideal for enclosures or the inner walls of the housing.

Building a heat pump enclosure yourself

Do you want to get started on a sound-damping enclosure for your heat pump yourself? That is perfectly possible with the right materials and a well-thought-out design. By building an enclosure yourself, you can not only reduce the noise level considerably, but also tailor the casing perfectly to your situation. In our detailed step-by-step guide to building a heat pump enclosure we explain exactly how to go about it, from choice of materials to ventilation openings and installation.

Don't let noise spoil things

By damping the noise of your heat pump in a targeted way, you contribute to a quieter living environment. Whether you choose a prefab solution or build a sound-damping enclosure yourself, always ensure the right balance between ventilation, use of materials and damping. With the right measures, your heat pump will not only be energy-efficient, but also whisper-quiet. Want to explore further which materials you can use to insulate your heat pump against noise? Then take a look at our blog, where we give some heat pump sound insulation tips .

Choose your language
Choose your currency
€

Recently added

Total incl. tax
0,00
Order for another €75,00 and receive free shipping
0
Compare
Start comparison

This product has been added to your cart