Menu
EUR

Buy self-adhesive needle felt for quick installation

Self-adhesive needle felt has a ready-to-use adhesive layer on the back, allowing you to apply the material quickly without loose spray adhesive. This makes this version particularly practical for larger, flat surfaces where you want to work quickly and c

Business customer? Discover the many benefits!
Discover more
6 Products
Show:
Self-adhesive needle felt - Beige
Self-adhesive needle felt - Beige
- Slight sound-insulating effect.
- Easy to apply thanks to the self-adhesive la...
29,99 24,79
19,99 per m²
 
Most popular
Self-adhesive needle felt - Black
Self-adhesive needle felt - Black
- Slight sound-insulating effect.
- Easy to apply thanks to the self-adhesive la...
29,99 24,79
19,99 per m²
 
Self-adhesive needle felt - Mouse grey
Self-adhesive needle felt - Mouse grey
- Slight sound-insulating effect.
- Easy to apply thanks to the self-adhesive la...
29,99 24,79
19,99 per m²
 
Self-adhesive needle felt - Light grey
Self-adhesive needle felt - Light grey
- Self-adhesive for quick and easy installation.
- Ideal for flat surfaces such ...
29,99 24,79
19,99 per m²
 
Self-adhesive needle felt - Anthracite
Self-adhesive needle felt - Anthracite
- Slight sound-insulating effect.
- Easy to apply thanks to the self-adhesive la...
29,99 24,79
19,99 per m²
 
Self-adhesive needle felt - Blue
Self-adhesive needle felt - Blue
- Slight sound-insulating effect.
- Easy to process thanks to the self-adhesive ...
29,99 24,79
19,99 per m²
 
Showing 1 - 6 of 6

What is self-adhesive needle felt?

Self-adhesive needle felt is upholstery felt with an adhesive layer on the back. You remove the protective film and apply the material directly to a suitable surface. Separate spray adhesive is therefore not needed. That makes this version especially practical when you want to line large, flat surfaces quickly and neatly.

The material is made of polyester fibres and is 4 mm thick. It combines a sleek finish with a slight sound-absorbing effect. Self-adhesive needle felt is used, among other things, for wall panels, acoustic panels and flat interior parts in campers and vans.

What do you use self-adhesive needle felt for?

Self-adhesive needle felt is mainly intended for flat surfaces where the material can make enough contact with the surface. Think of straight walls, wooden panels, acoustic panels and flat interior parts. The self-adhesive back makes it possible to line these surfaces without applying adhesive separately.

In campers and vans you can use the material, for example, for straight wall panels, door panels, cupboard walls and other flat parts. It can also be used in workspaces, offices and interiors when you want to give a hard surface a softer, calmer look.

Do you have lots of curves, complex corners or strongly shaped parts? Then full stretch needle felt is generally a better choice. This version has no self-adhesive back and is therefore easier to work around shapes and corners.

View self-adhesive needle felt View all types of needle felt

Self-adhesive needle felt in six colours

Choose a colour that suits the interior, panel or surface you want to finish. The self-adhesive version is available in six colours.

Standard stretch needle felt for upholstery

Light colours

Light grey and beige give walls and panels a relatively light, calm look. These colours suit interiors where you want to create a softer or more spacious finish.

View beige self-adhesive needle felt
Standard stretch needle felt for upholstery

Shades of grey

Mouse grey and anthracite are neutral colours that are easy to combine with different interior materials. Anthracite gives a darker, sleeker look.

Self-adhesive needle felt in shades of grey
Standard stretch needle felt for upholstery

Black and blue

Black gives panels and walls a dark, calm finish. With blue you can add more colour to a camper, van, panel or other interior project.

Black and blue self-adhesive needle felt

Self-adhesive needle felt per running metre

Self-adhesive needle felt is sold per running metre and has a fixed width of 150 cm. One running metre ordered therefore measures 100 × 150 cm and covers 1.5 m². By measuring the height and width of the surface beforehand, you can calculate how many running metres you need for your project.

If you order several metres, the material is supplied in one continuous piece where possible. The maximum length in one piece is 6 metres. If you need more than 6 metres, the order is divided into several pieces. Bear this in mind in your measurements and layout for larger wall or panel projects.

Properties of self-adhesive needle felt

This version is made of 100% PES and weighs around 300 grams per m². At a thickness of 4 mm, the material forms a thin layer of lining that finishes surfaces neatly without taking up unnecessary space.

  • Self-adhesive back: can be applied without separate spray adhesive.
  • Width of 150 cm: suitable for lining larger surfaces.
  • Sold per running metre: order the length you need for the project.
  • Thickness of 4 mm: for a soft, sleek finish.
  • 100% PES material: a lining material based on polyester fibres.
  • Six colours: light grey, mouse grey, beige, blue, black and anthracite.
  • Slightly sound-absorbing: can somewhat reduce reflections against hard surfaces.

Self-adhesive or full stretch needle felt?

The main difference between self-adhesive and full stretch needle felt lies in the installation and how easily it can be shaped. The adhesive layer of self-adhesive needle felt allows quick installation, but also limits the stretch of the material. This version therefore works best on flat surfaces.

  • Straight walls and flat panels: choose self-adhesive needle felt.
  • Curves and complex corners: choose full stretch needle felt.
  • Lots of shaped interior parts: full stretch is generally easier to work with.
  • Installation without spray adhesive: choose a self-adhesive version.
  • Thicker, more luxurious finish: take a look at premium self-adhesive needle felt.

You can also combine several types in one project. For example, use self-adhesive needle felt on straight wall panels and full stretch needle felt for wheel arches, curves and irregular parts.

Self-adhesive needle felt or premium self-adhesive needle felt?

Besides this standard self-adhesive version there is also premium self-adhesive needle felt. Both versions have an adhesive layer, but differ in material specification and look. The standard self-adhesive needle felt is a practical choice for a wide range of flat surfaces. The premium version is intended for projects where you specifically want a thicker or more luxurious finish.

So pay attention not only to how it is installed, but also to the end result you want. Before ordering, compare the thickness, look, available colours and product specifications of both versions.

How do you fit self-adhesive needle felt?

Good preparation is important for even adhesion. The surface must be clean, dry, dust-free and free of grease. Remove old adhesive residue, dirt and loose parts before you start. If the surface is unfamiliar, porous or treated, first check on a small area whether the adhesive layer sticks well enough.

  1. Measure the surface to be lined accurately.
  2. Lay the needle felt flat and mark the size you want.
  3. Cut the material to size with a sharp knife.
  4. Position the material first without removing all of the protective film.
  5. Peel off a small section of the protective film on one side.
  6. Fix this first section straight onto the surface.
  7. Then gradually pull the film further away while pressing the felt down evenly.
  8. Work from one direction to avoid creases and trapped air as far as possible.
  9. Press down the edges and corners carefully after fitting.

Do not remove all of the film in one go on a large surface. By working step by step you keep more control over the position of the material and reduce the chance of applying it crooked or with creases.

Which surface is suitable?

The adhesive layer works best when it makes even contact with a flat, clean and stable surface. Dust, grease, moisture, loose paint or a highly porous surface can reduce adhesion. It is therefore important to assess not only the needle felt, but also the surface beforehand.

If in doubt, test the adhesion first on a small and preferably non-visible area. That way you can check whether the surface is suitable before you line a whole panel or a complete wall.

Self-adhesive needle felt for wall and acoustic panels

Self-adhesive needle felt is suitable for finishing flat wall panels. The width of 150 cm makes it possible to cut many panels from a single width. By measuring carefully and planning the cuts beforehand, you limit cutting waste and keep the finish even around the edges.

The material can also be used as the visible finish of acoustic panels. The needle felt itself has a slight absorbing effect, but is not a complete solution for heavy noise nuisance. For more sound absorption or sound insulation, a combination with an acoustic or insulating material designed for the purpose may be needed.

Why order self-adhesive needle felt from Geluidsisolatie Deal?

At Geluidsisolatie Deal you will find self-adhesive needle felt in light grey, mouse grey, beige, blue, black and anthracite. Each colour is offered per running metre, 150 cm wide. That way you can match the length to the surface you want to line.

Not sure whether a self-adhesive version is suitable for your surface, or do you need more stretch? Then contact us. We are happy to help you compare self-adhesive, full stretch and premium needle felt.

Contact us for advice

Order self-adhesive needle felt

Take a look at the six available colours and calculate how many running metres of 150 cm width you need. Choose self-adhesive needle felt for straight walls, panels and other flat surfaces where you want to apply the material without separate spray adhesive. Dealing with curves or complex corners? Then compare this version with full stretch needle felt first.

View all colours

Frequently asked questions about self-adhesive needle felt

What is self-adhesive needle felt?

Self-adhesive needle felt is upholstery felt with an adhesive layer and protective film on the back. After removing the film you can apply the material directly to a suitable, flat surface.

Do I need spray adhesive for self-adhesive needle felt?

No, with a suitable surface no separate spray adhesive is needed. Make sure the surface is flat, clean, dry, dust-free and free of grease. If in doubt, test a small area first.

Which surfaces is self-adhesive needle felt suitable for?

This version is mainly suitable for flat surfaces, such as straight walls, wall panels, acoustic panels, door panels and flat interior parts. For strong curves and complex corners, full stretch needle felt is usually more suitable.

What is the difference between self-adhesive and full stretch needle felt?

Self-adhesive needle felt has an adhesive layer and can be fitted without spray adhesive. This layer does limit the stretch, however. Full stretch needle felt is applied with a separate adhesive and is easier to work around curved and irregular shapes.

How wide is self-adhesive needle felt?

Self-adhesive needle felt has a fixed width of 150 cm and is sold per running metre. One running metre is 100 × 150 cm and corresponds to 1.5 m² of material.

Can I order several metres in one piece?

Yes, several running metres are supplied in one continuous piece where possible. The maximum length in one piece is 6 metres. Longer orders are divided into several pieces.

Which colours is self-adhesive needle felt available in?

The material is available in light grey, mouse grey, beige, blue, black and anthracite.

How thick is self-adhesive needle felt?

This version is 4 mm thick and weighs around 300 grams per m². The material is made of 100% PES.

Does self-adhesive needle felt absorb sound?

Self-adhesive needle felt has a slight sound-absorbing effect. It can help to reduce hard reflections, but on its own it is not a complete solution for heavy noise nuisance or sound insulation.

How do I prevent creases while applying it?

Remove the protective film gradually and press the material down from one direction. First fix one side, then work step by step across the surface. That way you keep more control over the positioning.

Width
Thickness
Colour
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
0,00
Order for another €75,00 and receive free shipping
0
Compare
Start comparison

This product has been added to your cart