This combination sheet is a unique solution for those seeking both sound insulation and sound absorption in one product. The sheet consists of a mass-loaded layer bonded to acoustic polyurethane foam, combining the strengths of both materials. The 3 mm thick and 7 kg/m² mass layer provides additional mass, which significantly reduces sound transmission through walls, floors, machine enclosures, and vehicle structures. The polyurethane foam on the other side absorbs sound waves within the space itself, reducing reverberation, echo, and disturbing noise.
This dual action makes the combination sheet particularly suitable for situations where you want not only to improve the acoustics within a room but also to prevent sound from penetrating into adjacent spaces. This includes machine enclosures, technical rooms, vehicles, pipe ducts, or partition walls where both vibration dampening and sound absorption are desired.
The product has been tested and approved according to the FMVSS302 fire standard, a standard frequently applied to materials for vehicle interiors. This makes the sheet extremely suitable for use in cars, commercial vehicles, campers, and other vehicles where fire safety is important.
The thicker foam variants (40 and 50 mm) offer a higher absorption value and are particularly effective at lower frequencies, while the 30 mm variant is ideal for applications where space is limited but acoustic improvement is still desired.
The combination sheet is widely applicable, especially in situations where both insulation and absorption are desired:
Thanks to the self-adhesive backing and the approval according to FMVSS302, the sheet is also excellently suited for applications in the automotive sector, where both quick installation and fire safety are important requirements.
The combination sheet is easy to process and quick to install:
Tip: apply the sheet with the mass layer facing the sound source or construction, and the foam layer facing the room, for the best result in terms of both insulation and absorption.
Naturally, we take the utmost care with our products and the service we provide to our customers. However, in some cases, visual deviations such as a difference in colour, streaking, or irregular cells cannot be prevented. Furthermore, no rights can be derived from the recommended applications or properties of our products.
The combination sheet combines both functions in one product: the mass layer provides sound insulation, while the acoustic foam absorbs sound within the space. This means you do not have to combine two separate materials and you save time during installation.
Yes, the sheet is easy to cut to size with a sharp (utility) knife. Both the mass layer and the foam are easy to work with without special tools.
The self-adhesive backing offers good initial adhesion, provided the surface is clean, dry, and grease-free. For vertical or overhead applications, we recommend additionally fastening the sheet mechanically for extra security.
That depends on your application: 30mm is suitable when space is limited, while 40 or 50mm offer a higher absorption value and perform better at lower frequencies.
Yes, the sheet is tested according to the FMVSS302 fire standard, which is frequently applied to materials for vehicle interiors. This makes the product extremely suitable for cars, commercial vehicles, and campers.
Find the order you'd like to withdraw
Enter your email address and order number.
Check your mailbox
If your details match an order, you'll receive an email with a link to view and manage it.