Cyclin insulation boards are made of cellulose fibres from waste streams of paper and cardboard, making the material 100% circular. Only 6% bi-component synthetic fibre is required for bonding, the lowest percentage common in the market, which further limits the environmental impact of the material.
With a density of approximately 75 kg/m³, Cyclin provides both acoustic and thermal insulation. Acoustically, the material performs strongly: at a thickness of 40mm it reaches an alpha-w of 0.9, and at 70mm even an alpha-w of 1.0, which amounts to almost complete sound absorption. The material also insulates well thermally, with a thermal resistance (Rd) that increases from approximately 1.06 m²K/W at 40mm to 1.84 m²K/W at 70mm.
In addition, Cyclin is vapour-permeable and regulates moisture in the room because it can absorb and release up to 30% of its own weight in water vapour. The fibres do not irritate the skin or airways, making the material pleasant to work with. The boards are not self-adhesive and are supplied on a project basis, per pallet.
The material is mainly used as cavity filling and is also suitable for various other applications:
If you want to use the material in plain sight for sound absorption, cover it with an acoustically open material such as fabric or a perforated plate. Without covering, the absorbing effect will not be fully utilised.
Measure the surfaces to be insulated accurately before you begin. Cut the boards to size with an insulation knife, keeping some excess so that the material fits firmly in the construction and no gaps occur. Our advice is to clamp the boards between something, for example between two plaster laths in the case of a partition wall. Seal any seams and gaps well for optimal performance, and close the construction with plasterboard or another finishing layer. If the product is not delivered in the desired size, it is easy to cut to size yourself with suitable cutting tools.
Cyclin insulation boards are supplied on a project basis, per full pallet. The number of boards per pallet depends on the chosen thickness: the thicker the board, the fewer boards will fit on a pallet. Allow for a delivery time of approximately 2 weeks. Because the material is vapour-permeable and can absorb moisture, we recommend storing the boards in a dry place until installation.
Cyclin is most commonly used as cavity filling in partition walls and ceilings, but it is also suitable for walls, doors, enclosures and interior elements.
Yes, with an alpha-w of up to 1.0 at 70mm, the material is ideally suited for sound absorption. For use in plain sight, it must be covered with an acoustically open material, such as fabric or a perforated plate.
Cyclin insulation has a fire rating of Euroclass E.
Cyclin insulation is supplied on a project basis, per full pallet. Individual boards cannot be ordered separately.
Cyclin is a vapour-permeable material and can absorb and release up to 30% of its own weight in moisture. This contributes to a healthy indoor climate.
No, the boards are not self-adhesive. We recommend clamping the material within a construction, for example between plaster laths for a partition wall.
Yes, if the product is not delivered in the desired size, it is easy to cut to size yourself with an insulation knife. Keep some excess so that the material fits firmly in the construction.
Naturally, we take the utmost care with our products and our service to our customers. However, in some cases, visual deviations such as differences in colour, streaks or irregular cells cannot be prevented. Furthermore, no rights can be derived from the recommended applications or properties of our products.
Find the order you'd like to withdraw
Enter your email address and order number.
Check your mailbox
If your details match an order, you'll receive an email with a link to view and manage it.